The On Point Audio OPA-12 is a high-performance 12-inch (305mm) two-way loudspeaker system. The OPA-12 has been designed to provide superior intelligibility and fidelity for indoor permanent installations. The OPA-12 features a fully rotatable high-frequency horn design. Two horn patterns are available. The OPA-12 is supplied with a 60×40 degree pattern and an optional 90×40 degree included angle pattern is also available. The OPA-12 was designed to provide excellent full-range fidelity, but also superior vocal reproduction and intelligibility too. The system consists of a single 12″ woofer and constant directivity high-frequency horn. The high-frequency driver is a large format pure titanium design. The OPA-12 is an ideal design for fixed installations where excellent bandwidth and controlled time domain response are specified. The system design allows for superior intelligibility and articulation.

The OPA-12 system offers a complete selection of array and flying/suspension hardware. The enclosure offers multiple M10 rigging points and may be flown using forged shoulder eyebolts, a U-bracket, or the On Point Audio OPA-PTB pan and tilt bracket.

The OPA-12 enclosure is a high quality plywood construction and features On Point Audio’s Power Coat polyurea finish. The input section consists of a 4-pin barrier strip. The low-frequency section consists of a 12-inch (305mm) high-performance, ferrite based woofer. The high- frequency compression driver is a large format pure titanium device that is coupled to a fully rotatable high frequency horn.