The 108CIM enclosure is made of high grade copolymer that is optimized for high UV exposure and long life in harsh environments. All internal and external rigging and suspension hardware, as well as the metal grille are stainless steel or high strength aluminum. All suspension points are also made using 304-grade stainless steel.
The input section consists of a 5 pin barrier strip. A weather cover is provided with an integral gland nut connector for outdoor applications.
The gland nut is weather proof and is rated NEMA 6P (IP68). The connector will accommodate cable outside diameters from 7mm to 12mm (0.236″ to 0.472″). The maximum diameter will accommodate most 2 conductor AWG 12 cable assemblies.
The enclosure is also available with a 150 watt 3-tap line matching transformer. The tap values are 150 watts, 75 watts, and 37 watts. The 108IM transformer version may be easily configured for either a 100V or 70.7V primary.
The 108CIM is optimized for outdoor short throw applications such as theme parks, parade routes, baseball stadiums, and other entertainment/sports venues where permanent installation is required, as well as protection from direct weather exposure. The high acoustic output to size ratio makes the system ideal for short throw (70 x70 degree conical) applications. The system is also well suited for outdoor general public address applications.
The 108CIM grille has a 3-layer “rain shield” design that will minimize direct rain contact with the system’s transducers. The unique vent design also allows for easy moisture drainage from the interior of the enclosure. The enclosure and grill design are rated to IEC 529 IP45 (solid object penetration to 1 mm (0.04 inches) and water jets from any direction). The enclosures and components are also rated to Mil Spec 810.
The 108CIM may be mounted in selected installations (when permitted by local codes and appropriate substrates) using either a ONE SYSTEMS pan and tilt bracket (PT-38a or PT-30 pole mount bracket) or the 108CIM-U “U” bracket. A M8 forged shoulder eye bolt kit is available for all M8 suspension points.